Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.58 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Duty | Standard-Duty |
| Case Drain Code | 0 |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Flow [Max] | 15 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain | None |
| Bolt Circle Dia. | 4.187 in |
| Pressure [Min] | 600 psi |
| Flow Rate | 14 gal/min |
| Output Shaft Code | 01 |
| Special Features Hardware Code | AB |
| RPM [Max] | 152 rpm |
| Pressure [Max] | 1250 psi |
| Mounting Hole Size | 0.565 in |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| Displacement (in³/rev) | 22.58 |
| Flange Orientation | Standard |
| Special Features | Low Speed Valve |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Port Type | NPTF |
| Shaft Type | Straight w/ Woodruff Key |
| Mounting Holes | 0.535 in |
| Mounting Type Code | A |
| Port Size | 1/2, 1/2-14 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Series | H Series |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Mount Type | 2 Bolt |
| Port Code | B |
| Port Location | Side Port |
| Seal Material | Buna-N |
| Material | Cast Iron |
| Rotation | Standard Rotation |
| Pilot Diameter | 3.25 in |
| Splines | 0 |
| RPM [Min] | 152 rpm |
| Port Size & Location | 1/2 in NPTF Side |
| Motor Element | Gerotor |
| Paint Code | A |
| Corrosion Resistant | No |
| Weight | 15.2 LB |
