Find a Service Center
- H Series Hydraulic Motor
- 15 gal/min
- 14.1 in3
- Shaft: 1 in Straight With .31 Dia. Cross Hole
- 1/2 Side Port
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Code | B |
| Pilot Diameter | 3.25 in |
| Pressure [Max] | 1450 psi |
| Port Type | NPTF |
| Inlet Pressure [Max] | 2500 psi |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Output Torque at Rated PSI (inch/pounds) | 2669 in lb |
| Flange Orientation | Standard |
| Port Size & Location | 1/2 in NPTF Side |
| Port Location | Side Port |
| Special Features Assembly Code | 0 |
| Motor Type | Spool Valve |
| Bolt Circle Dia. | 4.18 in |
| Mount Type | 2 Bolt, SAE-A |
| Mounting Holes | 0.535 in |
| Splines | 0 |
| Shaft Size & Type | 1 in Straight With .31 Dia. Cross Hole |
| Port Size | 1/2 |
| Shaft Type | Straight w/ Cross Hole |
| Series | H Series |
| Rotation | Standard Rotation |
| Case Drain Code | 0 |
| Flow [Max] | 15 gal/min |
| RPM [Max] | 243 rpm |
| Special Features Hardware Code | 00 |
| Seal Material | Buna-N |
| Motor Element | Gerotor |
| Special Features | None |
| Duty | Standard-Duty |
| Case Drain | None |
| Corrosion Resistant | No |
| Displacement (in³/rev) | 14.1 |
| Mounting Type Code | A |
| Paint Code | A |
| Output Shaft Code | 07 |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Weight | 13.0 LB |
