Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Special Features | None |
| RPM [Min] | 760 rpm |
| Rotation | Standard Rotation |
| Port Code | B |
| Duty | Standard-Duty |
| Mounting Type Code | B |
| Output Shaft Code | 08 |
| Case Drain | None |
| Mounting Hole Size | 3/8 in |
| Seal Material | Buna-N |
| Motor Type | Spool Valve |
| Inlet Pressure [Max] | 2500 psi |
| Port Size & Location | 1/2 in NPTF Side |
| Mount Type | 4 Bolt |
| Port Location | Side Port |
| Port Type | NPTF |
| Paint Code | A |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mounting Holes | 3/8-16 |
| Case Drain Code | 0 |
| Series | H Series |
| Flange Orientation | Standard |
| Displacement (in³/rev) | 4.5 |
| Material | Cast Iron |
| Port Size | 1/2, 1/2-14 |
| Motor Element | Gerotor |
| RPM [Max] | 760 rpm |
| Shaft Size & Type | Straight |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Flow [Max] | 15 gal/min |
| Special Features Assembly Code | 0 |
| Splines | 0 |
| Shaft Type | Straight w/ Cross Hole |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Bolt Circle Dia. | 3 1/4 in |
| Flow Rate | 15 gal/min |
| Special Features Hardware Code | 00 |
| Pilot Diameter | 1.75 in |
| Pressure [Max] | 1800 psi |
| Corrosion Resistant | No |
| Weight | 11.5 LB |
