Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.8 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Pressure [Max] | 1800 psi |
| Material | Cast Iron |
| Mounting Type Code | A |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 2.8 |
| Special Features Hardware Code | AA |
| Flow [Max] | 12 gal/min |
| RPM [Max] | 969 rpm |
| Port Size & Location | 1/2 in NPTF Side |
| Port Code | B |
| Port Type | NPTF |
| Mounting Holes | 0.535 in |
| Mounting Hole Size | 0.535 in |
| Splines | 0 |
| Port Location | Side Port |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Bolt Circle Dia. | 4.19 in |
| Case Drain | None |
| Output Shaft Code | 01 |
| Flange Orientation | Standard |
| Corrosion Resistant | No |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Shaft Type | Straight w/ Woodruff Key |
| Paint Code | A |
| Motor Type | Spool Valve |
| Seal Material | Buna-N |
| Flow Rate | 12 gal/min |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Inlet Pressure [Max] | 2500 psi |
| Special Features | Free Running Gerotor |
| Geroter/Geroler Options | Free Running |
| Case Drain Code | 0 |
| Pilot Diameter | 3.25 in |
| Special Features Assembly Code | 0 |
| Mount Type | 2 Bolt |
| Port Size | 1/2, 1/2-14 |
| Series | H Series |
| Motor Element | Gerotor |
| Duty | Standard-Duty |
| Weight | 13.0 LB |
