Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Corrosion Resistant | No |
| Case Drain Code | 0 |
| Rotation | Standard Rotation |
| Port Code | B |
| Shaft Size & Type | 1 in - 6T Spline |
| Motor Type | Spool Valve |
| Port Size | 1/2, 1/2-14 |
| Flow [Max] | 15 gal/min |
| Special Features | None |
| Material | Cast Iron |
| Case Drain | None |
| Flow Rate | 15 gal/min |
| Seal Material | Buna-N |
| Inlet Pressure [Max] | 2500 psi |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Flange Orientation | Standard |
| Motor Element | Gerotor |
| Duty | Standard-Duty |
| Pilot Diameter | 3.25 in |
| Paint Code | A |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Series | H Series |
| Output Torque at Rated PSI (inch/pounds) | 194.72 in lb |
| Port Location | Side Port |
| Displacement (in³/rev) | 22.6 |
| RPM [Max] | 152 rpm |
| Mounting Holes | 0.535 in |
| Bolt Circle Dia. | 4.19 in |
| Special Features Hardware Code | 00 |
| Port Size & Location | 1/2 in NPTF Side |
| Port Type | NPTF |
| Mount Type | 2 Bolt |
| Pressure [Max] | 1250 psi |
| Shaft Type | Splined |
| Special Features Assembly Code | 0 |
| Output Shaft Code | 02 |
| RPM [Min] | 152 rpm |
| Mounting Hole Size | 0.535 in |
| Splines | 6 |
| Mounting Type Code | A |
| Weight | 14.7 LB |
