Find a Service Center
Alternate Products
- 2.6875" Shaft, 3" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Seal Type | Contact Seals |
| End Type | Open End |
| Bearing Insert | GY1211KRRB |
| Overall Width | 3 1/8 in |
| Housing Construction | 1 Piece |
| Bolt Holes | 2 |
| Inch/Metric | Inch |
| Base Length | 10 1/2 in |
| Base Height | 1 5/16 in |
| Bolt Hole Spacing Range [Max] | 9 3/8 in |
| Lubrication | Relubricatable |
| Bearing Type | Ball Bearing |
| Series | YAK Series |
| Collar O.D. | 3.422 in |
| Bolt Size | 3/4 in |
| Length Through Bore | 2.75 in |
| Bolt Hole Spacing | 8 in |
| Housing Material | Cast Iron |
| Insert Type | Steel Insert |
| Locking Device | Setscrew Locking Collar |
| Base Width | 2 7/8 in |
| Bearing Design | Non-Expansion |
| Shaft Dia. | 2.6875 in |
| Mounted Unit Duty | Normal-Duty |
| Housing Height | 6 1/16 in |
| Bolt Hole Spacing Range [Min] | 6 5/8 in |
| Pillow Block Type | Thru-Bolt |
| Weight | 16.18 LB |
| EAN or UPC | 87796157620 |
