Find a Service Center
Alternate Products
AMI Bearings Inc.
KHLP201-8
Narrow Inner Ring Cast Iron Housing Material Pillow Block
Item #101398993
- 0.5" Shaft, 1.0625" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Housing Height | 2 3/32 in |
| Overall Width | 1 7/32 in |
| Mounted Unit Duty | Normal-Duty |
| Seal Type | Contact Seals |
| Collar O.D. | 0.9 in |
| Shaft Dia. | 0.5 in |
| Housing Material | Cast Iron |
| Bolt Holes | 2 |
| Lubrication | Relubricatable |
| Base Width | 1 3/16 in |
| Bolt Hole Spacing Range [Min] | 2 3/4 in |
| Housing Construction | 1 Piece |
| Length Through Bore | 1.07813 in |
| Base Length | 4 7/8 in |
| Bearing Type | Ball Bearing |
| Locking Device | Setscrew Locking Collar |
| Bearing Design | Non-Expansion |
| Bearing Insert | GY1008KRRB |
| Bolt Hole Spacing Range [Max] | 4 1/2 in |
| Inch/Metric | Inch |
| Pillow Block Type | Thru-Bolt |
| Series | YAK Series |
| Bolt Hole Spacing | 3 5/8 in |
| Bolt Size | 3/8 in |
| End Type | Open End |
| Base Height | 11/32 in |
| Insert Type | Steel Insert |
| Weight | 1.088 LB |
| EAN or UPC | 87796157439 |
