
- 1" Shaft, 1.4375" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- The new Fafnir STB series two-bolt housed units are furnished assembled and ready for mounting by means of two bolts from under the housing.These units are ideal for applications where space is limited, access to bolt screws is from bottom of unit, loads are not severe and reversing moments are not enountered.The units are assembled with GYA-RRB bearings with positive contact land riding seals, and setscrew locking.These units are factory prelubricated, but a grease fitting is provided for relubrication if required.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
End Type | Open End |
Series | STB Series |
Insert Type | Steel Insert |
Inch/Metric | Inch |
Seal Type | Contact Seals |
Pillow Block Type | Tapped Base |
Lubrication | Relubricatable |
Bearing Type | Ball Bearing |
Bolt Holes | 2 |
Overall Width | 1 31/64 in |
Bolt Size | 3/8-16 |
Bolt Hole Spacing | 2 in |
Housing Height | 2 13/16 in |
Bolt Hole Spacing Range [Max] | 2 in |
Base Length | 3 in |
Bearing Design | Non-Expansion |
Housing Material | Cast Iron |
Base Height | N/A |
Bolt Hole Spacing Range [Min] | 2 in |
Base Width | 1 31/64 in |
Bearing Insert | GYA100RRB |
Mounted Unit Duty | Normal-Duty |
Shaft Dia. | 1 in |
Locking Device | Setscrew Locking Collar |
Housing Construction | 1 Piece |
Weight | 1.501 LB |
EAN or UPC | 87796179974 |
