Find a Service Center
- 3.9375" Shaft, 5.6875" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| End Type | Open End |
| Housing Height | 11 1/16 in |
| Bolt Hole Length | 1 1/8 in |
| Locking Device | Eccentric Locking Collar |
| Housing Width | 10 3/4 in |
| Series | RSAO Series |
| Pillow Block Type | Thru-Bolt |
| Bolt Size | 1 in |
| Collar O.D. | 5 3/4 in |
| Base Width | 5 1/8 in |
| Bolt Hole Width | 1 3/4 in |
| Bolt Holes | 2 |
| Bolt Hole Spacing | 14 3/4 in |
| Housing Material | Cast Iron |
| Length Through Bore | 5.0625 in |
| Bearing Design | Non-Expansion |
| Seal Type | Contact Seals |
| Bearing Type | Ball Bearing |
| Base Length | 17.313 in |
| Collar No. | SN315K |
| Inch/Metric | Inch |
| Shaft Dia. | 3.9375 in |
| Lubrication | Relubricatable |
| Mounted Unit Duty | Heavy-Duty |
| Bearing Insert | GN315KRRB |
| Base Height | 2 9/16 in |
| Insert Type | Steel Insert |
| Housing Construction | 1 Piece |
| Overall Width | 5 1/8 in |
| Weight | 89.5 LB |
| EAN or UPC | 87796062085 |
