- 2.6875" Shaft, 4.5625" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Length Through Bore | 3.5 in |
| Housing Height | 8 9/32 in |
| Inch/Metric | Inch |
| Shaft Dia. | 2.6875 in |
| Bolt Hole Length | 1 in |
| Bearing Type | Ball Bearing |
| Bolt Hole Spacing | 12 in |
| Bearing Design | Non-Expansion |
| Housing Width | 7 7/16 in |
| Lubrication | Relubricatable |
| End Type | Open End |
| Series | RSAO Series |
| Overall Width | 4 3/8 in |
| Pillow Block Type | Thru-Bolt |
| Locking Device | Eccentric Locking Collar |
| Collar No. | SO211K |
| Housing Construction | 1 Piece |
| Housing Material | Cast Iron |
| Mounted Unit Duty | Heavy-Duty |
| Bearing Insert | GN211KRRB |
| Collar O.D. | 4 in |
| Bolt Holes | 2 |
| Bolt Hole Width | 1 3/8 in |
| Seal Type | Contact Seals |
| Base Width | 4 3/8 in |
| Base Length | 15 3/8 in |
| Bolt Size | 7/8 in |
| Insert Type | Steel Insert |
| Base Height | 1 3/4 in |
| Weight | 41.948 LB |
| EAN or UPC | 87796061828 |

