Find a Service Center
- Single Row Angular Contact Bearing, 120 mm ID x 260 mm OD x 55 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Greater Than Normal Clearance (C3), 40° Contact Angle
description
- The angular contact medium 7300WN series is dimensionally interchangeable with the radial 300 series.The features of the 7000WN series include a refined bore diameter. The 7300WN series can sustain heavier thrust and combined loads applications in which the thrust load is in one direction or,in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust is present in both directions or where axial displacement of the shaft must be restricted. For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Size 7303W have a 20° contact angle and a steel cage.Sizes 7304WN through 7318WN have a 40° contact angle and a one-piece, ball poloted, pressed brass cage. Larger sizes 7319WN through 7330WN have a 40° contact angle and a one-piece, outer-ring-piloted, high strength, machined bronze cage.Sizes 7306WN to 7318WN also available with a one-piece, high strength, machined bronze retainer (MBR).
applications
- General industrial
- Agricultural
- Chemical
- Utilities
| Bearing Type | Angular Contact |
| icNumber | 7695863 |
| Seal Type | Unsealed |
| Inner Ring Width | 55 mm |
| Inch/Metric | Metric Bore |
| Snap Ring | No Snap Ring |
| Radial Internal Clearance | C3 |
| Internal Design | Universal Mounting |
| Cage Material | Brass/Bronze |
| Static Load Rating [Max] | 58500 lbf |
| Precision | Standard |
| No. in Set | Single Bearing |
| Preload Level | None |
| Material | Steel |
| Dynamic Load Rating | 64000 lbf |
| Lubricant | Oil Preservative |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Capacity | Standard Capacity |
| Outer Ring Width | 55 mm |
| Bore Type | Round Bore |
| Locking Device | No Locking Device |
| Enclosure | Open |
| O.D. Type | Straight |
| Precision Level | Standard (ABEC 1) |
| O.D. | 260 mm |
| Seal Material | None |
| Fillet Radius | 0.098 in |
| Origin | Single Row Angular Contact |
| I.D. | 120 mm |
| Ball Material | Steel |
| Contact Angle | 40° |
| Cage Type | Metal |
| Rows of Balls | Single |
| Weight | 30.77 LB |
| EAN or UPC | 87796074347 |
