Find a Service Center
- Radial Shaft Seal
- 960 mm Shaft Diameter
- 1040 mm Housing Bore Diameter
- 23 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Pressure | 15 psi |
| Seal Design | Molded Design |
| Lip Style | Internal |
| Lip Type | Non-Split |
| Lip Material | Nitrile |
| Construction | HDS2 |
| Temperature Range [Max] | 250 °F |
| Shaft Dia. | 960 mm |
| Seal Application | General Purpose |
| Temp Description | w/8 Lugs |
| Spring Material | Carbon Steel Garter |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 1040 mm |
| Inch/Metric | Metric |
| Case Construction | Steel Case w/Inner Case |
| Temperature Range [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Weight | 22.064 LB |
| EAN or UPC | 85311147828 |
