
- 25 mm ID x 37 mm OD x 7 mm Wide
- Double Sealed (Contact)
- ABEC 1
- Standard Cage
- Normal Clearance
applications
- Textiles
- Electric motors
- Pumps
- Gearboxes
- Power tools
features
- Deep, uninterrupted raceway
- Carries axial loads in both directions
- Carries radial loads at high speeds
compliances
- 0
Preload Level | None |
Bearing Type | Deep Groove |
Dynamic Load Rating | 654 lbf |
Inner Ring Width | 0.28 in, 7 mm |
Material | Bearing Steel |
O.D. Type | Cylindrical |
Enclosure | Seal On Both Sides |
Outer Ring Width | 0.28 in, 7 mm |
Width | 0.28 in, 7 mm |
Inch/Metric | Metric |
Fillet Radius | 0.3 mm |
Bearing Design | Deep Groove Design |
Seal Material | Nitrile Rubber (NBR) |
Seal Type | Contacting Seal |
Cage Material | Bearing Steel |
Contact Angle | 0° |
Precision Level | Standard (ABEC 1) |
Bore Type | Cylindrical |
Radial Internal Clearance Specification | Normal Clearance |
Ball Material | Steel |
Cage Type | Metal |
O.D. | 1.46 in, 37 mm |
Locking Device | No Locking Device |
Rows of Balls | Single |
Radial Internal Clearance | Normal |
Series | 618 |
Precision | Standard |
Lubricant | Grease |
I.D. | 0.98 in, 25 mm |
Snap Ring | No Snap Ring |
No. in Set | Single Bearing |
Capacity | Standard Capacity |
Limiting Speed - Oil | 20000 rpm |
Weight | 0.053 LB |
EAN or UPC | 7316577095220 |
