Find a Service Center
- Radial Shaft Seal
- 590 mm Shaft Diameter
- 640 mm Housing Bore Diameter
- 22 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Temperature Range [Max] | 250 °F |
| Lip Style | Internal |
| Surface Speed [Nom] | 5,000 ft/min |
| Seal Design | Molded Design |
| Pressure | 15 psi |
| Cover/Compensation Ring/Plate Required | No |
| Construction | HDS2 |
| Lip Type | Non-Split |
| Seal Application | General Purpose |
| Lip Material | Nitrile |
| Temperature Range [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Housing Bore Dia. | 640 mm |
| Case Construction | Steel Case w/Inner Case |
| Inch/Metric | Metric |
| Shaft Dia. | 590 mm |
| Spring Material | Carbon Steel Garter |
| Weight | 7.028 LB |
| EAN or UPC | 85311175012 |
