Find a Service Center
Alternate Products
- 15 mm ID x 42 mm OD x 19 mm Wide
- Double Sealed (Contact)
- ABEC 1
- Plastic Cage
- Normal Clearance
applications
- Pumps
- Compressors
- Centrifuges
features
- Inner and outer ring raceway
- Suitable for simultaneously acting radial and axial loads
- Axial load capacity increases with increasing contact angle
compliances
- 0
| Snap Ring | No Snap Ring |
| Inch/Metric | Metric |
| Ball Material | Steel |
| Inner Ring Width | 0.75 in, 19 mm |
| Contact Angle | 30 Degree |
| Temperature Range [Max] | 230 °F |
| Seal Material | Nitrile Rubber (NBR) |
| Radial Internal Clearance Specification | Normal Clearance |
| No. in Set | Single Bearing |
| Radial Internal Clearance | Normal |
| Preload Level | Normal Axial Clearance |
| Flush Ground | No |
| Bearing Design | Converging Angle Design |
| Seal Type | Contacting Seal |
| Temperature Range [Min] | -22 °F |
| icNumber | 7700431 |
| Locking Device | No Locking Device |
| Capacity | Standard Capacity |
| Outer Ring Width | 0.75 in, 19 mm |
| Series | 322 |
| Special Features | Grease for Medium Temperatures |
| O.D. Type | Cylindrical |
| I.D. | 0.59 in, 15 mm |
| Rows of Balls | Double |
| Material | Bearing Steel |
| Cage Type | Plastic |
| Width | 0.75 in, 19.05 mm |
| Bore Type | Cylindrical |
| Precision | Standard |
| Enclosure | Seal On Both Sides |
| Cage Material | Polyamide |
| Precision Level | Standard (ABEC 1) |
| Bearing Type | Unmounted, Angular Contact |
| Lubricant | Grease |
| O.D. | 1.65 in, 42 mm |
| Weight | 0.292 LB |
| EAN or UPC | 7316570033786 |
