Find a Service Center
Alternate Products
- 12 mm ID x 32 mm OD x 5/8" Wide
- Double Sealed (Contact)
- ABEC 1
- Plastic Cage
- Normal Clearance
applications
- Pumps
- Compressors
- Centrifuges
features
- Inner and outer ring raceway
- Suitable for simultaneously acting radial and axial loads
- Axial load capacity increases with increasing contact angle
compliances
- 0
| Bearing Design | Converging Angle Design |
| Origin | Double Row Deep Groove |
| Static Load Rating [Max] | 1260 lbf |
| O.D. | 1.26 in, 32 mm |
| O.D. Type | Cylindrical |
| No. in Set | Single Bearing |
| Capacity | Standard Capacity |
| Inch/Metric | Metric |
| Series | 3220 |
| Width | 0.63 in, 15.88 mm |
| Contact Angle | 30 Degree |
| Bearing Type | Unmounted, Angular Contact |
| Outer Ring Width | 0.63 in, 15.88 mm |
| Temperature Range [Min] | -22 °F |
| icNumber | 7696097 |
| Flush Ground | No |
| Seal Type | Contacting Seal |
| Rows of Balls | Double |
| Special Features | Grease for Medium Temperatures |
| Snap Ring | No Snap Ring |
| Ball Material | Steel |
| Seal Material | Nitrile Rubber (NBR) |
| Preload Level | Normal Axial Clearance |
| Bore Type | Cylindrical |
| Dynamic Load Rating | 2273 lbf |
| Temperature Range [Max] | 230 °F |
| Inner Ring Width | 0.63 in, 15.88 mm |
| Radial Internal Clearance | Normal |
| Cage Material | Polyamide |
| Precision | Standard |
| I.D. | 0.47 in, 12 mm |
| Cage Type | Plastic |
| Radial Internal Clearance Specification | Normal Clearance |
| Material | Bearing Steel |
| Lubricant | Grease |
| Enclosure | Seal On Both Sides |
| Locking Device | No Locking Device |
| Precision Level | Standard (ABEC 1) |
| Weight | 0.141 LB |
| EAN or UPC | 7316570452716 |
