Find a Service Center
- Radial Shaft Seal
- 356.01 mm Shaft Diameter
- 393.7 mm Housing Bore Diameter
- 17.48 mm Width
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Temperature Range [Max] | 250 °F |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 356.01 mm |
| Housing Bore Dia. | 393.7 mm |
| Seal Application | General Purpose |
| Lip Type | Single Lip w/Spring |
| Temperature Range [Min] | -40 °F |
| Case Construction | Steel Case w/Inner Case |
| Pressure | 15 psi |
| Lip Material | Duralip (Carboxylated Nitrile) |
| Seal Design | Molded Design |
| Lip Style | Internal |
| Construction | HDS2 |
| Surface Speed [Nom] | 5,000 ft/min |
| Inch/Metric | Metric |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Spring Material | Carbon Steel Garter |
| Weight | 5.844 LB |
| EAN or UPC | 85311123808 |
