- Single Row Angular Contact Bearing, 55 mm ID x 120 mm OD x 29 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle
features
- MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
- 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
- 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
- ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
- 7300-PJ and PJD Series bearings are used for very heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
| No. in Set | Single Bearing |
| Material | Steel |
| Precision | Standard |
| Outer Ring Width | 29 mm |
| Cage Material | Brass/Bronze |
| Dynamic Load Rating | 19200 lbf |
| I.D. | 55 mm |
| O.D. | 120 mm |
| Temperature Range [Max] | 450 °F |
| Width | 29.000 mm |
| Radial Internal Clearance | Normal |
| Limiting Speed - Grease | 5100 rpm |
| Inner Ring Width | 29 mm |
| Lubricant | Oil Preservative |
| Flush Ground | Yes |
| Locking Device | No Locking Device |
| Series | 7300PJ |
| Inch/Metric | Metric Bore |
| Origin | Single Row Angular Contact |
| Precision Level | Standard (ABEC 1) |
| Seal Type | Unsealed |
| Ball Material | Steel |
| Static Load Rating | 60 kN |
| O.D. Type | Straight |
| Capacity | Standard Capacity |
| Static Load Rating [Max] | 13900 lbf |
| icNumber | 7695807 |
| Rows of Balls | Single |
| Snap Ring | No Snap Ring |
| Fillet Radius | 2 mm |
| Cage Type | Metal |
| Limiting Speed - Oil | 6600 rpm |
| Enclosure | Open |
| Internal Design | Universal Mounting |
| Seal Material | None |
| Contact Angle | 40° |
| Preload Level | None |
| Bearing Type | Angular Contact |
| Radial Internal Clearance Specification | Normal Clearance |
| Bore Type | Round Bore |
| Weight | 3.281 LB |
| EAN or UPC | 97741017664 |

