Find a Service Center
Alternate Products
MRC Bearing Service
8310
8000 Series PumPac® 40°/15° Angular Contact Ball Bearing Set
Item #101169056
- Single Row Angular Contact Bearing, 50 mm ID x 110 mm OD x 27 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7300-P Medium Series bearings are available in bore sizes from 10mm o 200 mm. They can accommodate very heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| Radial Internal Clearance Specification | Normal Clearance |
| Bore Type | Round Bore |
| Radial Internal Clearance | Normal |
| Preload Level | None |
| Precision | Standard |
| Cage Type | Metal |
| Limiting Speed - Oil | 7500 rpm |
| Series | 7300P |
| icNumber | 7699061 |
| Static Load Rating | 52 kN |
| No. in Set | Duplex Set |
| Cage Material | Brass/Bronze |
| O.D. Type | Straight |
| Seal Type | Unsealed |
| Lubricant | Oil Preservative |
| Fillet Radius | 2 mm |
| Enclosure | Open |
| Inner Ring Width | 27 mm |
| Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Seal Material | None |
| Locking Device | No Locking Device |
| Limiting Speed - Grease | 5800 rpm |
| Origin | Single Row Angular Contact |
| Dynamic Load Rating | 16700 lbf |
| Static Load Rating [Max] | 11900 lbf |
| Temperature Range [Max] | 450 °F |
| Outer Ring Width | 27 mm |
| Snap Ring | No Snap Ring |
| Internal Design | Universal Mounting |
| Contact Angle | 40° |
| O.D. | 110 mm |
| Width | 27.000 mm |
| I.D. | 50 mm |
| Flush Ground | Yes |
| Rows of Balls | Single |
| Bearing Type | Angular Contact |
| Inch/Metric | Metric Bore |
| Ball Material | Steel |
| Capacity | Standard Capacity |
| Weight | 2.815 LB |
| EAN or UPC | 97741017589 |
