Find a Service Center
Alternate Products
MRC Bearing Service
8224
8000 Series PumPac® 40°/15° Angular Contact Ball Bearing Set
Item #104015899
- Single Row Angular Contact Bearing, 120 mm ID x 215 mm OD x 40 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7200-P Light Series bearing are available in bore sizes ranging from 10 mm to 200 mm. They are used with heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| Precision | Standard |
| Capacity | Standard Capacity |
| Outer Ring Width | 1.57 in, 40 mm |
| Static Load Rating | 163 kN |
| Dynamic Load Rating | 165 kN |
| Preload Level | Light |
| Seal Type | Unsealed |
| Material | Bearing Steel |
| Internal Design | Universal Mounting |
| Limiting Speed - Grease | 2200 rpm |
| Bearing Type | Unmounted, Angular Contact |
| Ball Material | Steel |
| Bore Type | Cylindrical |
| Precision Level | Standard (ABEC 1) |
| Snap Ring | No Snap Ring |
| Inner Ring Width | 1.57 in, 40 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Radial Internal Clearance | Normal |
| Cage Type | Metal |
| I.D. | 4.72 in, 120 mm |
| Limiting Speed - Oil | 3200 rpm |
| Fillet Radius | 2 mm |
| icNumber | 7699064 |
| O.D. Type | Cylindrical |
| Enclosure | Open |
| Inch/Metric | Metric |
| Width | 1.57 in, 40 mm |
| O.D. | 8.46 in, 215 mm |
| Series | 7200P |
| Lubricant | Oil Preservative |
| Flush Ground | Yes |
| No. in Set | Duplex Set |
| Static Load Rating [Max] | 36600 lbf |
| Locking Device | No Locking Device |
| Temperature Range [Max] | 450 °F |
| Contact Angle | 40 Degree |
| Origin | Single Row Angular Contact |
| Rows of Balls | Single |
| Seal Material | None |
| Cage Material | Brass |
| Weight | 14.315 LB |
| EAN or UPC | 97741017077 |
