
- 50 mm ID x 110 mm OD x 1 3/4" Wide
- Double Sealed
- No Snap Ring
- Maximum Capacity
- Double Row Ball Bearing
applications
- Used with heavy radial loads, two-directional thrust loads or a combination of both
features
- Has filling notches on one side to permit assembling the maximum number of balls into the bearing
- Contact angles converge outside the bearing
- All inner and outer rings have closure grooves
- Bearings may be equipped with seals, shields, snap rings or any combination
- Has very heavy radial capacity
- Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
- One-piece, heat-treated steel for maximum retention
- snapped into place after the full quota of balls has been introduced between the inner and outer ring
Inner Ring Width | 1 3/4 in |
Cage Type | Metal |
Lubricant | Chevron SRI-2 |
Locking Device | No Locking Device |
I.D. | 50 mm |
Bore Type | Round Bore |
Limiting Speed - Sealed | 4000 rpm |
O.D. Type | Straight |
Material | Steel |
Inch/Metric | Metric Bore |
Limiting Speed - Grease | 4000 rpm |
Seal Material | Rubber |
Flush Ground | No |
Ball Material | Steel |
Limiting Speed - Oil | 5300 rpm |
O.D. | 110 mm |
Fillet Radius | 2 mm |
Preload Level | None |
Bearing Type | Angular Contact |
Series | 5300M |
Temperature Range [Max] | 250 °F |
Capacity | Maximum Capacity |
Static Load Rating [Max] | 21400 lbf |
Dynamic Load Rating | 21400 lbf |
Outer Ring Width | 1 3/4 in |
Radial Internal Clearance | Normal |
Seal Type | Contact Seals |
Contact Angle | 30° |
Radial Internal Clearance Specification | Normal Clearance |
Snap Ring | No Snap Ring |
Temperature Range [Min] | -22 °F |
Width | 44.450 mm |
Precision | Standard |
Precision Level | Standard (ABEC 1) |
Rows of Balls | Double |
icNumber | 7696940 |
Static Load Rating | 95 kN |
Cage Material | Steel |
No. in Set | Single Bearing |
Origin | Double Row Deep Groove |
Enclosure | Double Sealed |
Weight | 4.203 LB |
EAN or UPC | 97741015097 |
