Skip to content Skip to navigation menu
5300-C, 5300-SB Medium Series Bearing

5310CFF

5300-C, 5300-SB Medium Series Bearing
Item #101169023
  • 50 mm ID x 110 mm OD x 1 3/4" Wide
  • Double Shielded
  • No Snap Ring
  • Standard Capacity
  • Double Row Ball Bearing
5300-C, 5300-SB Medium Series Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 50 mm ID x 110 mm OD x 1 3/4" Wide
  • Double Shielded
  • No Snap Ring
  • Standard Capacity
  • Double Row Ball Bearing

applications

  • Used with heavy radial loads, two-directional thrust loads or a combination of both

features

  • Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
  • No filling notches
  • Fully meets the requirements of American Petroleum Institute Specification 610
  • Both the inner and outer rings have closure grooves
  • One-piece, heat-treated steel for maximum retention
  • snapped into place after the full quota of balls has been introduced between the inner and outer ring
Temperature Range [Max] 250 °F
Seal Type Non-Contacting Seal
Temperature Range [Min] -22 °F
Limiting Speed - Sealed 4000 rpm
Inner Ring Width 1.75 in, 44.4 mm
Seal Material Tinplate
Static Load Rating [Max] 14400 lbf
Static Load Rating 64 kN
Ball Material Steel
Radial Internal Clearance C3
Contact Angle 30 Degree
icNumber 7695845
I.D. 1.97 in, 50 mm
Snap Ring No Snap Ring
Preload Level C3 Axial Clearance
Lubricant Grease
Locking Device No Locking Device
Flush Ground No
Cage Type Metal
O.D. 4.33 in, 110 mm
Bore Type Cylindrical
Width 1.75 in, 44.45 mm
Limiting Speed - Oil 5300 rpm
Dynamic Load Rating 85.2 kN
Inch/Metric Metric
Enclosure Shield On Both Sides
Rows of Balls Double
Outer Ring Width 1.75 in, 44.4 mm
Bearing Type Unmounted, Angular Contact
Fillet Radius 2 mm
No. in Set Single Bearing
Capacity Standard Capacity
Series 5300C
Precision Standard
Radial Internal Clearance Specification Normal Clearance
Limiting Speed - Grease 4000 rpm
Material Bearing Steel
Origin Double Row Deep Groove
Precision Level Standard (ABEC 1)
O.D. Type Cylindrical
Cage Material Bearing Steel
Weight 3.823 LB
EAN or UPC 97741014946
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison