
- 40 mm ID x 90 mm OD x 1 7/16" Wide
- Double Sealed
- No Snap Ring
- Standard Capacity
- Double Row Ball Bearing
applications
- Used with heavy radial loads, two-directional thrust loads or a combination of both
features
- Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
- No filling notches
- Fully meets the requirements of American Petroleum Institute Specification 610
- Both the inner and outer rings have closure grooves
- One-piece, heat-treated steel for maximum retention
- snapped into place after the full quota of balls has been introduced between the inner and outer ring
Series | 5300C |
Snap Ring | No Snap Ring |
Radial Internal Clearance | C3 |
Seal Type | Contacting Seal |
Preload Level | C3 Axial Clearance |
Temperature Range [Max] | 250 °F |
Locking Device | No Locking Device |
O.D. | 3.54 in, 90 mm |
Precision | Standard |
Inner Ring Width | 1.44 in, 36.5 mm |
Rows of Balls | Double |
Width | 1.44 in, 36.51 mm |
Contact Angle | 30 Degree |
Temperature Range [Min] | -22 °F |
Capacity | Standard Capacity |
I.D. | 1.57 in, 40 mm |
Lubricant | Grease |
Seal Material | Nitrile Rubber (NBR) |
Material | Bearing Steel |
Bearing Type | Unmounted, Angular Contact |
Origin | Double Row Deep Groove |
Inch/Metric | Metric |
Cage Material | Bearing Steel |
Limiting Speed - Oil | 6700 rpm |
icNumber | 7696209 |
Cage Type | Metal |
No. in Set | Single Bearing |
Outer Ring Width | 1.44 in, 36.5 mm |
Static Load Rating | 43 kN |
Ball Material | Steel |
Enclosure | Seal On Both Sides |
Bore Type | Cylindrical |
Flush Ground | No |
Fillet Radius | 1.5 mm |
O.D. Type | Cylindrical |
Dynamic Load Rating | 60.5 kN |
Static Load Rating [Max] | 9760 lbf |
Precision Level | Standard (ABEC 1) |
Limiting Speed - Grease | 5000 rpm |
Radial Internal Clearance Specification | Normal Clearance |
Limiting Speed - Sealed | 5000 rpm |
Weight | 2.215 LB |
EAN or UPC | 97741014595 |
