Find a Service Center
- Mast Guide Bearing
- 25 mm ID x 3 in OD x 1 in Overall Width
description
- Industrial truck mast guide ball bearings are a family of special bearings tailored to meet the requirements of the industrial truck industry. These bearings must be able to accommodate heavy radial loads, withstand heavy shock loads, and handle overturning moments produced by combined radial and thrust loads. Special lubricants are selected to meet the rigorous demands of industrial truck service. To retain the lubricant and protect the bearing from adverse environmental conditions, the bearings are equipped with either synthetic rubber or polypropylene seals.
| Temperature Range [Max] | 250 °F |
| Inner Ring Offset | 0.165 in |
| icNumber | 84693 |
| O.D. | 3 in, 76.2 mm |
| Outer Ring Width | 1 in, 25.4 mm |
| Bearing Type | Deep Groove |
| Dynamic Load Rating | 7600 lbf |
| Temperature Range [Min] | -22 °F |
| Material | Bearing Steel |
| Static Load Rating [Max] | 27400 lbf |
| I.D. | 0.98 in, 25 mm |
| Enclosure | Seal On Both Sides |
| Inner Ring Width | 0.67 in, 17 mm |
| Weight | 1.2 LB |
| EAN or UPC | 97741007085 |
