Find a Service Center
- Mast Guide Bearing
- 1 in ID x 2 1/4 in OD x 1 in Overall Width
description
- Industrial truck mast guide ball bearings are a family of special bearings tailored to meet the requirements of the industrial truck industry. These bearings must be able to accommodate heavy radial loads, withstand heavy shock loads, and handle overturning moments produced by combined radial and thrust loads. Special lubricants are selected to meet the rigorous demands of industrial truck service. To retain the lubricant and protect the bearing from adverse environmental conditions, the bearings are equipped with either synthetic rubber or polypropylene seals.
| Material | Bearing Steel |
| Outer Ring Width | 1 in, 25.4 mm |
| Static Load Rating [Max] | 1830 lbf |
| Bearing Type | Deep Groove |
| Origin | Single Row Radial |
| Enclosure | Seal On Both Sides |
| I.D. | 1 in, 25.4 mm |
| Inner Ring Width | 0.88 in, 22.23 mm |
| O.D. | 2.25 in, 57.15 mm |
| Dynamic Load Rating | 3440 lbf |
| Inner Ring Offset | N/A |
| Temperature Range [Min] | -22 °F |
| Temperature Range [Max] | 250 °F |
| Weight | 0.568 LB |
| EAN or UPC | 97741003414 |
