AMP9407F

Solid Pillow Block

Item #101487895

Auto Replenish

each One-time purchase

Product Details

Easy bearing clearance: can be field adjusted to meet application needs
Mounting to suit the load and installation requirements
Shaft ready: prelubricated with standard grease for normal operation
other lubricants available for special conditions
Fully self-aligning: spherical roller bearing to accommodate operational and installation misalignment
Rugged housing: standard material – cast iron, steel or ductile iron available on request
Carburized raceways: case-carburized inner races provide a hard, fatigue-resistant surface and a tough, crack-resistant ductile core
Interchangeable seals: three types of seals to match the application requirements: Z seal, for the broad range of normal operating conditions
K seal, for dusty, dirty conditions
and M seal, for protection against liquid contamination
For extra protection under severe conditions, auxiliary caps are also available

Specifications

Flange Type	4-Bolt Flange
Base Height	1 7/8 in
Seal Type	Heavy Contact Seals, Spring Loaded Heavy Contact Seals
Shaft Dia.	4.4375 in
Collar O.D.	6 1/8 in
Bearing Design	Non-Expansion
Base Length	20 1/4 in
Bolt Size	1 1/8 in
Bolt Hole Size	2 in
Length Through Bore	6.75 in
RPM [Max]	900 rpm
Series	9000
Pillow Block Type	Thru-Bolt
Grease Fitting Size	1/4 in NPT
Bolt Hole Spacing - Width	4.25 in
Center Line to Base Dimension [Min]	6 1/8 in
Housing Material	Cast Iron
Inch/Metric	Inch
Bolt Holes	4
Handle / Housing Material	Cast Iron
Temperature Range [Max]	200 °F, 225 °F
Bolt Hole Length	2 in
Size Code	14
Lubrication	Exxon Ronex MP
Housing Height	12 1/2 in
Housing Construction	1 Piece
Insert Type	Steel Insert
End Type	Two Open Auxiliary Cap Seals
Mounted Unit Duty	Heavy-Duty
Bolt Hole Spacing	16 in
Locking Device	Adapter Mounted
Bearing Type	Spherical Roller Bearing
Temperature Range [Min]	-20 °F
Base Width	7 1/2 in
Weight	198.0 LB
EAN or UPC	698210002466