AMP5207

Solid Pillow Block

Item #101487837

Auto Replenish

each One-time purchase

Product Details

Easy bearing clearance: can be field adjusted to meet application needs
Mounting to suit the load and installation requirements
Shaft ready: prelubricated with standard grease for normal operation
other lubricants available for special conditions
Fully self-aligning: spherical roller bearing to accommodate operational and installation misalignment
Rugged housing: standard material – cast iron, steel or ductile iron available on request
Carburized raceways: case-carburized inner races provide a hard, fatigue-resistant surface and a tough, crack-resistant ductile core
Interchangeable seals: three types of seals to match the application requirements: Z seal, for the broad range of normal operating conditions
K seal, for dusty, dirty conditions
and M seal, for protection against liquid contamination
For extra protection under severe conditions, auxiliary caps are also available

Specifications

Seal Type	Heavy Contact Seals, Spring Loaded Heavy Contact Seals
Inch/Metric	Inch
End Type	Two Open Auxiliary Cap Seals
Flange Type	2-Bolt Flange
Locking Device	Double Setscrew Locking Collar
Bolt Hole Size	1 3/8 in
Bolt Holes	2
Bolt Size	3/4 in
Housing Construction	1 Piece
Base Height	1 3/4 in
Bolt Hole Spacing	8 1/4 in
Pillow Block Type	Thru-Bolt
Bearing Design	Non-Expansion
Insert Type	Steel Insert
Temperature Range [Max]	200 °F, 225 °F
Temperature Range [Min]	-20 °F
Size Code	8
Bolt Hole Length	1 3/8 in
Mounted Unit Duty	Heavy-Duty
Center Line to Base Dimension [Min]	3 in
Series	5000
Grease Fitting Size	1/8 in NPT
Length Through Bore	4.375 in
Base Length	11 1/4 in
Housing Material	Cast Iron
RPM [Max]	2000 rpm
Bearing Type	Spherical Roller Bearing
Base Width	3 3/8 in
Handle / Housing Material	Cast Iron
Housing Height	5 3/4 in
Shaft Dia.	2.4375 in
Lubrication	Exxon Ronex MP
Weight	26.7 LB
EAN or UPC	698210002107