20GSF10 145TC1.00

GSF Series Worm Gear Reducer

Item #101954871

Auto Replenish

each One-time purchase

Product Details

Designed for quick and easy attachment of any standard NEMA "C" flange electric motor. Gear reducers may be run in either direction of rotation.

Worms for smaller size units are mounted on ball bearings
Worms for larger units and all output shafts are mounted on tapered roller bearings
All shaft and quill extensions are equipped with spring loaded lip type, synthetic element oil seals
Standard quill sizes
Mounting flanges cannot be changed in the field

Flange should be mounted to another bearing supported surface or rigid plate if used as a holding brake
In certain circumstances, tooth clutches can be engaged at differential speeds
Not intended for use in most cyclic applications or high speed engagement
Tooth clutches are normally engaged when stationary

Specifications

Ratio	10:1
Output (Shaft or Bore) Size	1 in
Box Length	8 1/16 in
Frame	140TC
Output RPM @ Input RPM	175 rpm @ 1750 rpm
Input HP @ RPM	1.52 hp @ 1150 rpm, 1.92 hp @ 1750 rpm
Box Width	6 5/8 in
Box Height	6 13/16 in
Input Configuration	C-Face Quilled
Base to Shaft Center Height Basic Unit	2 3/4 in
Output Configuration	Hollow Shaft w/ Mounting Flange
Reduction Type	Single Reduction
Max. Thrust Load @ 1150 rpm	N/A
Torque Out @ 1750 rpm	616 in lb
Output Torque @ RPM	616 in lb @ 1750 rpm, 728 in lb @ 1150 rpm
Base to Shaft Center Height w/Std. Base Kit	N/A
Motor Application	General Purpose
Input (Shaft or Bore) Size	7/8 in
Frame Size	140TC
Bolt Centers w/ Std. Base Kit (in)	N/A
HP @ RPM	1.5 hp @ 1800 rpm
Center Distance	2 in
Output RPM @ 1750 rpm Input	175 rpm
Thermal Input Horsepower @ 1750 RPM	N/A
Worm Position	Top
Input Base to Shaft Center Height Basic Unit	4 3/4 in
Washdown Duty	No
Torque Out @ 1150 rpm	728 in lb
Max. Overhung Load @ 1750 rpm	N/A
Weight	27.0 LB