18GSA30 56C1.00

GSA Series Worm Gear Reducer

Item #101373835

Auto Replenish

each One-time purchase

Product Details

Designed for quick and easy attachment of any standard NEMA "C" flange electric motor. Gear reducers may be run in either direction of rotation.

Worms for smaller size units are mounted on ball bearings
Worms for larger units and all output shafts are mounted on tapered roller bearings
All shaft and quill extensions are equipped with spring loaded lip type, synthetic element oil seals
Standard quill sizes
Torque arms may be easily rotated to other positions, mounted on the opposite side, or omitted entirely

Shaft mounted units will be furnished with torque arm or mounting flange on the side shown unless otherwise specified on order

Specifications

Torque Out @ 1750 rpm	494 in lb
Max. Overhung Load @ 1750 rpm	N/A
Max. Thrust Load @ 1150 rpm	N/A
Input Configuration	C-Face Quilled
Box Width	5 3/4 in
Motor Application	General Purpose
Output RPM @ 1750 rpm Input	58.33 rpm
Frame	56C
Input (Shaft or Bore) Size	5/8 in
Ratio	30:1
Output (Shaft or Bore) Size	3/4 in
Input HP @ RPM	0.51 hp @ 1150 rpm, 0.63 hp @ 1750 rpm
Output Configuration	Hollow Shaft w/ Torque Arm
Frame Size	56C
Box Height	6 3/8 in
Output RPM @ Input RPM	58 rpm @ 1750 rpm
Bolt Centers w/ Std. Base Kit (in)	N/A
Reduction Type	Single Reduction
Box Length	6 9/16 in
HP @ RPM	0.5 hp @ 1800 rpm
Torque Out @ 1150 rpm	578 in lb
Worm Position	Top
Thermal Input Horsepower @ 1750 RPM	N/A
Output Torque @ RPM	494 in lb @ 1750 rpm, 578 in lb @ 1150 rpm
Center Distance	1 3/4 in
Base to Shaft Center Height w/Std. Base Kit	N/A
Base to Shaft Center Height Basic Unit	2 3/4 in
Input Base to Shaft Center Height Basic Unit	4 1/2 in
Washdown Duty	No
Weight	14.1 LB