Hub City | PB251NX2 1/4 | PB251N Series Nickel Plated Pillow Block

PB251NX2 1/4

PB251N Series Nickel Plated Pillow Block

Item #101033153

Cast Iron - Nickel Plated

Regreasable

Contact Seals

+ Show More

Auto Replenish

each One-time purchase

Product Details

Molded glass fiber reinforced polyamide retainer
Grade 10 balls
Races and balls are 52100 steel, hardened, ground, and honed for quiet operation
Slotted bolt holes
Rugged cast iron or Hub-Alloy® housing
Zone-hardened inner race
Prelubricated with high quality lithium grease. 1/4-28 Zerk fitting provided to allow for relube
Choice of narrow or wide inner race, setscrew locking or eccentric collar locking, normal-duty, or medium-duty bearings
Knurled cup point setscrews at 120° to minimize inner ring distortion
Recessed housing base to accommodate uneven mounting surfaces
Spherical outer race to allow up to 1.5° misalignment
All bearings have single lip Nitrile rubber seals with steel trash guard
Steel fingers are standard on wide inner race bearings only

Specifications

Temperature Range [Min]	-25 °F
Base Width	2 1/2 in
Housing Height	5 9/16 in
Overall Width	2 5/8 in
Locking Device	Setscrew Locking Collar
Bearing Type	Ball Bearing
Lubrication	Relubricatable
Bolt Hole Spacing Range [Min]	6 3/4 in
Base Length	9 5/8 in
Center of Bearing to Front of Inner Ring	1.378 in
Housing Construction	1 Piece
Housing Material	Cast Iron - Nickel Plated
Mounted Unit Duty	Normal-Duty
Bolt Size	5/8 in
Series	PB251N
Pillow Block Type	Thru-Bolt
Housing Width	2 1/2 in
Misalignment Range	±1 1/2°
Bearing Design	Non-Expansion
Length Through Bore	1.909 in
Bearing Insert	B250X2 1/4
Insert Type	Steel Insert
End Type	Open End
Seal Type	Contact Seals
Base Height	1 3/16 in
Bolt Hole Spacing	7 7/16 in
Temperature Range [Max]	225 °F
Shaft Dia.	2.25 in
Bolt Hole Spacing Range [Max]	8 1/8 in
Bolt Holes	2
Collar O.D.	2.978 in
Inch/Metric	Inch
Weight	11.0 LB
EAN or UPC	662798249803

PB251NX2 1/4