SSF2S-114

Intermediate Duty 2-Bolt Flange Unit

Item #100936373

0.88 in Inside Diameter

+ Show More

Auto Replenish

each One-time purchase

Product Details

Stamped steel housing with bearing insert
Zone hardened inner ring with 120° spacing setscrew lock with diamond faceted setscrews
Single lip contact seal

Specifications

Mounted Unit Duty	Intermediate
Overall Height (in)	1.1094
Overall Height to Inner Ring	1.11 in
Housing Width (in)	1.8125
Pilot Configuration	No Pilot
Overall Width	1.81 in
Bore Shape	Straight
Heat Treat Method (Inner Race)	Zone-Hardened
Housing Construction	Two Piece
Flange Type	2-Bolt Flange
Inch/Metric	Inch
Bore Size - Inch	0.875
End Cap	No
Relubricatable	Yes
Overall Width (in)	1.8125
Bolt Size	0.31 in
Foot Height	0.17 in
Radial Static Load Capacity (lb)	1651
Inner Race Length (in)	1.1094
Centerline to Front Face (in)	0.765
Duty Series	Intermediate
Lubrication	Lithium Complex NLGI 2 Grease
Measure Units	Inch
Finish	Uncoated
Length Through Bore	1.11 in
Overall Height to Inner Ring (in)	1.109
Replaceable Insert	Yes
Radial Static Load Capacity	1651 lb
Retainer Material	Molded Fiber Glass Reinforced Nylon
Overall Length (in)	3.75
Internal Clearance	Standard
Inner Ring OD (in)	1.375
Misalignment Type	Static Only
Foot Height (in)	0.172
Housing Width	1.81 in
Expansion	No
Retainer Type	Ball Riding Retainer
I.D.	0.88 in
Bearing Insert Coating	Uncoated
Seal Type	Single Lip Contact Seal
Outer Ring Land Profile	Standard
Insert Material	52100 Bearing Steel
Radial Dynamic Load Capacity (lb)	2801
Bolt Center-to-Center Length (in)	3
Length Through Bore (in)	1.1094
Bore Type	Straight
Bolt Size (in)	0.3125
Inner Race Heat Treat Method	Zone-Hardened
Radial Dynamic Load Capacity	2801 lb
Maximum Operating Temperature	200
RPM [Max]	3500 rpm
Insert No.	LS-114
Housing Material	Stamped Steel
Weight	0.716 LB
EAN or UPC	662460336961