Find a Service Center
- Size 1515
- 1.35:1 Ratio
- Single, Counter Clockwise, Left Output Shaft
- Shaft Input, Facing You
description
- Designed for industrial applications where low speed/high torque drives are required.
features
- Compact, rugged construction
- Precision straight or spiral tooth bevel gears
- Shafts are ground and polished, heat treated alloy steel
- One-piece housing constructed from 60-45-10 ductile iron
- All shafts are supported by two tapered roller bearings
- Keys on the projecting shafts
- By interchanging the vent plug and drain plug you can invert the unit, thereby changing the shaft location and rotation
caution
- Sudden, slam-type stalling should be avoided. Applications of this kind, which are beyond the expected normal performance of pneumatic power motors, will damage the power train due to the dynamic shock loads imposed.
| Bearing Type | Roller Bearing |
| Box Width | 10 5/8 in |
| Output Shaft Position | Left |
| Output (Shaft or Bore) Size | 1 3/8 in |
| Washdown Duty | No |
| Output Configuration | Single |
| Input Shaft Position | Facing You |
| Torque Out @ 1150 rpm | 5867 in lb |
| Output Relation to Base | No Base |
| Relative Shaft Rotation | Counter Clockwise |
| Torque Out @ 1750 rpm | N/A |
| Max. Overhung Load @ 1750 rpm | 1300 lb/in |
| Input Configuration | Shaft Input |
| Gear Style | Bevel |
| Input Relation to Base | No Base |
| Unit Size | 1515 |
| Box Length | 9 7/16 in |
| Input (Shaft or Bore) Size | 1 3/8 in |
| Ratio | 1.35:1 |
| Bolt Hole Pattern | 6 in x 6 in |
| Assembly | F |
| Output RPM @ 1750 rpm Input | 1296 rpm |
| Shaft Arrangement | #4 |
| Box Height | 7 1/2 in |
| Weight | 72.002 LB |
| EAN or UPC | 781711617205 |
