Find a Service Center
- 1.540" Center Distance
- 20:1 Ratio
- Shaft Input
- Right Output
- Universal Worm Position
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Periodic inspection is required to determine if the unit is in proper working order by inspecting and replacing the urethane seal, inspecting to see if material buildup has occurred and ensuring proper adjustment and tightness of all adjustable bolts.
- The Guardian™ is designed to help minimize the potential for danger but cannot guarantee protection in all situations or applications.
| Housing Material | Cast Iron |
| Family Name | Std Unit |
| Box Width | 3 11/16 in |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Base to Centerline of Input Shaft | 3 29/64 in |
| Worm Position | Universal |
| Bolt Center | 5 1/4 in x 4 5/16 in |
| Max. Input HP @ 100 rpm | 0.056 hp |
| Torque Out @ 1750 rpm | 435 in lb |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Shaft Assembly Code | J |
| Fan Cooled | No |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Box Length | 5 1/8 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Use With | 715 |
| Output (Shaft or Bore) Size | 3/4 in |
| Frame | N/A |
| Box Height | 5 3/8 in |
| Output RPM @ 1750 rpm Input | 87.5 rpm |
| Reduction Type | Single Reduction |
| Input (Shaft or Bore) Size | 5/8 in |
| Input Configuration | Shaft Input |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Ratio | 20:1 |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Center Distance | 1.54 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Motor Application | General Purpose |
| Output Configuration | Right Output |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Frame Size | Shaft Input, Not a C-Face |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Output Torque @ RPM | 380 in lb @ 1150 rpm, 435 in lb @ 1750 rpm |
| Lubrication | None |
| Torque Out @ 1150 rpm | 380 in lb |
| Output RPM @ Input RPM | 88 rpm @ 1750 rpm |
| Input HP @ RPM | 0.43 hp @ 1150 rpm, 0.72 hp @ 1750 rpm |
| HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
| Washdown Duty | No |
| Base to Centerline of Output Shaft | 1 29/32 in |
| Bolt Center Length x Bolt Center Width | 5 1/4 in x 4 5/16 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Weight | 17.1 LB |
| EAN or UPC | 781711516416 |
