The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Proximity Sensor
Prox Ready, 12 mm
Port Size
3/8
Stroke
15 in
Port Type
NPTF
Shock Absorbers - Slide
Shock Absorber w/Stroke Adjuster (Both Ends)
Flow Controls
w/o Flow Controls
Dowel Pin Holes
w/o Dowel Pin Holes
Support Rod Material
Steel
Stroke Tolerance
+0.030 in / -0.000 in
Slide Orientation
Right Hand (Standard)
Pressure [Max]
150 psi
Bearing Type
Composite Bearing w/Oversized Support Rods
Series
HBT
Support Rod Diameter
30 mm
Base Wt.
15.67 lb
Cylinder Bore Size
2 in
Positions
2 Position
Port Location
Standard (Position 1)
Slide Configuration Option Code
A
Cylinder Type
NFPA Pneumatic Cylinder
Cylinder Seal Material
Buna-N
Temperature Range [Min]
0 °F
Proximity Sensor Code
J1
Slide Type
Thrust Slide
Temperature Range [Max]
165 °F
Weight per Inch
0.83 lb
Cushions - Slide
No Cushions
Intermediate Stroke
N/A
Bumpers - Slide
No Bumpers
Weight
28.12 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
