The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Cylinder Type
NFPA Hydraulic Cylinder
Bearing Type
Composite Bearing w/Oversized Support Rods
Proximity Sensor
Prox Ready, 12 mm
Stroke
8 in
Port Type
NPTF
Base Wt.
9.83 lb
Cushions - Slide
No Cushions
Port Size
1/4
Temperature Range [Max]
165 °F
Port Location
Standard (Position 1)
Pressure [Max]
750 psi
Proximity Sensor Code
J1
Positions
2 Position
Support Rod Material
Steel
Series
HBT
Bumpers - Slide
No Bumpers
Stroke Tolerance
+0.030 in / -0.000 in
Temperature Range [Min]
0 °F
Slide Orientation
Right Hand (Standard)
Cylinder Seal Material
Buna-N
Flow Controls
w/o Flow Controls
Slide Configuration Option Code
A
Shock Absorbers - Slide
Shock Absorber w/Stroke Adjuster (Both Ends)
Slide Type
Thrust Slide
Dowel Pin Holes
w/o Dowel Pin Holes
Cylinder Bore Size
1.5 in
Support Rod Diameter
25 mm
Intermediate Stroke
N/A
Weight per Inch
0.63 lb
Weight
14.87 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
