The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Bumpers - Slide
No Bumpers
Dowel Pin Holes
w/o Dowel Pin Holes
Support Rod Material
Steel
Temperature Range [Min]
0 °F
Cylinder Seal Material
Buna-N
Temperature Range [Max]
165 °F
Proximity Sensor Code
J1
Slide Orientation
Right Hand (Standard)
Base Wt.
9.83 lb
Flow Controls
w/o Flow Controls
Positions
2 Position
Shock Absorbers - Slide
Shock Absorber w/Stroke Adjuster (Both Ends)
Support Rod Diameter
25 mm
Port Location
Standard (Position 1)
Intermediate Stroke
N/A
Slide Type
Thrust Slide
Proximity Sensor
Prox Ready, 12 mm
Stroke Tolerance
+0.030 in / -0.000 in
Series
HBT
Pressure [Max]
150 psi
Slide Configuration Option Code
A
Cylinder Type
NFPA Pneumatic Cylinder
Port Size
1/4
Cushions - Slide
No Cushions
Port Type
NPTF
Cylinder Bore Size
1.5 in
Stroke
8 in
Bearing Type
Composite Bearing w/Oversized Support Rods
Weight per Inch
0.63 lb
Weight
14.87 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
