Parker's B3 and B5 series three-way., body ported valves are ideal for controlling larger single-acting cylinders, air bags and vacuum generators. Body ported for in-line, direct pipe porting. The same valve can also be used on Parker's IEM (Inlet/Exhaust Manifold), allowing more than one valve to be mounted on a common base. Featuring Parker's exclusive Wear Compensation System, expect millions of non-lubricated cycles from this valve. Electrical connections are easy using Parker's 15 mm DIN-style connectors. Flush non-locking overrides are standard.
features
IEM (inlet/exhaust manifold)
Factory prelubricated
CE approved
Maximum Performance – low friction, fast response, lower operating pressures and less wear
Long Cycle Life – under pressure, radial expansion of the seal occurs to maintain sealing contact with the value bore
NonLube Service – no lubrication required for continuous valve shifting
Bi-Directional Spool Seals – common spool used for any pressure, including vacuum
Valve Body Style
Inline
Voltage Rating
24 VDC
Engineering Level
C
Pilot Exhaust
Vented Pilot Exhaust
Overrides
Flush - Non-Locking Override
Valve Type
3-Way, 2 Position
Valve Duty
Standard Duty
Port Size
1/4
Height
2.060 in
Return Type
Spring
Pilot Source
Internal Pilot Supply - Port 1
Stations
N/A
Length
5.290 in
Temperature Range [Max]
120 °F
Spool Seal Type
Buna-N
Operation
Electric
Width
1.180 in
Port Type
NPT
Operating Pressure Range
Vacuum to 145 psi
Actuator Type
Solenoid
Spool Description
Normally Closed
Outlet Port
1/4 in NPT
Series
B5
Cv Flow
1.4
Installed Options
None
Wiring Options
None
Temperature Range [Min]
5 °F
Coil Style
15 mm 3-Pin DIN 43650C
Solenoid
Single
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
