6320C3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761714

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Enclosure	Open
Bore Type	Round Bore
Static Load Rating [Max]	31,800.00 lbf
Precision Level	Standard (ABEC 1)
Limiting Speed - Grease	2800 rpm
Corner Radius [Min]	3.00 mm
Rows of Balls	Single
Dynamic Load Rating	38,906.00 lbf
Outer Ring Width	47 mm
Inner Ring Width	47 mm
Ball Material	Steel
No. in Set	Single Bearing
Locking Device	No Locking Device
Cage Type	Metal
Bearing Type	Radial
Preload Level	None
Snap Ring	No Snap Ring
I.D.	100 mm
Contact Angle	0°
Inch/Metric	Metric Bore
Radial Internal Clearance	C3
Limiting Speed - Oil	3400 rpm
O.D.	215.0000 mm
Seal Material	None
Radial Internal Clearance Specification	Greater Than Normal Clearance
O.D. Type	Straight
Material	Steel
Lubricant	Mul-Temp SRL
Capacity	Standard Capacity
Precision	Standard
Width	47 mm
Cage Material	Pressed Steel
icNumber	7696421
Seal Type	Unsealed
Weight	15.335 LB
EAN or UPC	29176017858