6313DDUC3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761527

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Cage Type	Metal
Width	33 mm
Snap Ring	No Snap Ring
Seal Material	Buna-N
Ball Material	Steel
Seal Type	Contact Seals
Limiting Speed - Oil	6000 rpm
O.D.	140.0000 mm
Precision Level	Standard (ABEC 1)
Preload Level	None
Outer Ring Width	33 mm
I.D.	65 mm
Bore Type	Round Bore
Enclosure	Double Sealed
Limiting Speed - Grease	3400 rpm
Inch/Metric	Metric Bore
Corner Radius [Min]	2.10 mm
Locking Device	No Locking Device
Radial Internal Clearance	C3
No. in Set	Single Bearing
icNumber	7696260
Precision	Standard
Inner Ring Width	33 mm
Material	Steel
Cage Material	Pressed Steel
Capacity	Standard Capacity
Dynamic Load Rating	21,835.00 lbf
Rows of Balls	Single
O.D. Type	Straight
Static Load Rating [Max]	13,450.00 lbf
Lubricant	Mul-Temp SRL
Radial Internal Clearance Specification	Greater Than Normal Clearance
Contact Angle	0°
Bearing Type	Radial
Weight	4.72 LB
EAN or UPC	29176065934