6311ZZC3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761413

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Material	Steel
Corner Radius [Min]	2.00 mm
Inch/Metric	Metric Bore
Width	29 mm
I.D.	55 mm
Radial Internal Clearance Specification	Greater Than Normal Clearance
Seal Type	Non-Contact Seals
Cage Type	Metal
Precision Level	Standard (ABEC 1)
O.D. Type	Straight
Outer Ring Width	29 mm
Static Load Rating [Max]	10,040.00 lbf
Inner Ring Width	29 mm
Precision	Standard
Limiting Speed - Oil	6700 rpm
No. in Set	Single Bearing
Capacity	Standard Capacity
Rows of Balls	Single
Seal Material	Metal
Bore Type	Round Bore
Radial Internal Clearance	C3
Limiting Speed - Grease	5600 rpm
Locking Device	No Locking Device
Dynamic Load Rating	16,878.00 lbf
Lubricant	Mul-Temp SRL
Enclosure	Double Shielded
Ball Material	Steel
icNumber	7696022
O.D.	120.0000 mm
Bearing Type	Radial
Preload Level	None
Contact Angle	0°
Cage Material	Pressed Steel
Snap Ring	No Snap Ring
Weight	3.089 LB
EAN or UPC	29176017223