6309DDUC3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761295

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Limiting Speed - Grease	4800 rpm
Radial Internal Clearance Specification	Greater Than Normal Clearance
Locking Device	No Locking Device
O.D.	100.0000 mm
Outer Ring Width	25 mm
Dynamic Load Rating	12,511.00 lbf
Enclosure	Double Sealed
No. in Set	Single Bearing
Ball Material	Steel
Inner Ring Width	25 mm
Contact Angle	0°
Seal Type	Contact Seals
Cage Type	Metal
Material	Steel
Static Load Rating [Max]	7,210.00 lbf
Seal Material	Buna-N
Limiting Speed - Oil	8000 rpm
Lubricant	Mul-Temp SRL
Precision	Standard
Bearing Type	Radial
Precision Level	Standard (ABEC 1)
O.D. Type	Straight
icNumber	7695966
Capacity	Standard Capacity
Cage Material	Pressed Steel
Preload Level	None
I.D.	45 mm
Snap Ring	No Snap Ring
Corner Radius [Min]	1.50 mm
Inch/Metric	Metric Bore
Bore Type	Round Bore
Radial Internal Clearance	C3
Width	25 mm
Rows of Balls	Single
Weight	1.841 LB
EAN or UPC	29176065750