6306DDUC3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761093

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Preload Level	None
Radial Internal Clearance Specification	Greater Than Normal Clearance
Radial Internal Clearance	C3
Ball Material	Steel
No. in Set	Single Bearing
O.D. Type	Straight
Width	19 mm
Locking Device	No Locking Device
Rows of Balls	Single
Lubricant	Mul-Temp SRL
Material	Steel
Limiting Speed - Grease	6700 rpm
Dynamic Load Rating	5,940.00 lbf
Seal Type	Contact Seals
Corner Radius [Min]	1.10 mm
Outer Ring Width	19 mm
Static Load Rating [Max]	3,380.00 lbf
Cage Material	Pressed Steel
Enclosure	Double Sealed
Inch/Metric	Metric Bore
Inner Ring Width	19 mm
Contact Angle	0°
Bearing Type	Radial
Precision Level	Standard (ABEC 1)
Snap Ring	No Snap Ring
Precision	Standard
icNumber	7695878
I.D.	30 mm
Seal Material	Buna-N
Cage Type	Metal
Capacity	Standard Capacity
Bore Type	Round Bore
Limiting Speed - Oil	12000 rpm
O.D.	72.0000 mm
Weight	0.761 LB
EAN or UPC	29176065569