6220ZZC3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761707

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

I.D.	100 mm
Inch/Metric	Metric Bore
O.D. Type	Straight
Outer Ring Width	34 mm
Cage Material	Pressed Steel
Locking Device	No Locking Device
Enclosure	Double Shielded
No. in Set	Single Bearing
Inner Ring Width	34 mm
Width	34 mm
Seal Type	Non-Contact Seals
Bearing Type	Radial
Contact Angle	0°
Dynamic Load Rating	28,798.00 lbf
Static Load Rating [Max]	20,900.00 lbf
Limiting Speed - Grease	3600 rpm
Rows of Balls	Single
Seal Material	Metal
Capacity	Standard Capacity
Limiting Speed - Oil	4300 rpm
Corner Radius [Min]	2.10 mm
Material	Steel
Ball Material	Steel
Precision Level	Standard (ABEC 1)
Precision	Standard
Lubricant	Mul-Temp SRL
O.D.	180.0000 mm
Radial Internal Clearance Specification	Greater Than Normal Clearance
Preload Level	None
Snap Ring	No Snap Ring
Radial Internal Clearance	C3
Cage Type	Metal
Bore Type	Round Bore
icNumber	7696025
Weight	6.934 LB
EAN or UPC	29176015915