6209DDUC3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761270

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Rows of Balls	Single
Bore Type	Round Bore
icNumber	7695913
Precision	Standard
Precision Level	Standard (ABEC 1)
Material	Steel
Preload Level	None
O.D. Type	Straight
Limiting Speed - Grease	5300 rpm
Cage Material	Pressed Steel
Limiting Speed - Oil	9000 rpm
Width	19 mm
Capacity	Standard Capacity
Seal Material	Buna-N
Radial Internal Clearance	C3
Bearing Type	Radial
Static Load Rating [Max]	4,586.00 lbf
Inner Ring Width	19 mm
No. in Set	Single Bearing
Seal Type	Contact Seals
Corner Radius [Min]	1.10 mm
Lubricant	Mul-Temp SRL
Radial Internal Clearance Specification	Greater Than Normal Clearance
Dynamic Load Rating	7,081.00 lbf
Contact Angle	0°
Enclosure	Double Sealed
Ball Material	Steel
Snap Ring	No Snap Ring
Inch/Metric	Metric Bore
O.D.	85.0000 mm
I.D.	45 mm
Outer Ring Width	19 mm
Cage Type	Metal
Locking Device	No Locking Device
Weight	0.924 LB
EAN or UPC	29176064425