6206

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761061

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Dynamic Load Rating	4,384.00 lbf
Material	Steel
Seal Material	None
Radial Internal Clearance Specification	Normal Clearance
O.D. Type	Straight
Ball Material	Steel
Capacity	Standard Capacity
Corner Radius [Min]	1.00 mm
Limiting Speed - Oil	13000 rpm
Bore Type	Round Bore
Limiting Speed - Grease	11000 rpm
icNumber	7695998
Cage Material	Pressed Steel
No. in Set	Single Bearing
Precision	Standard
Locking Device	No Locking Device
Preload Level	None
Bearing Type	Radial
Radial Internal Clearance	Normal
Static Load Rating [Max]	2,540.00 lbf
Contact Angle	0°
O.D.	62.0000 mm
I.D.	30 mm
Outer Ring Width	16 mm
Precision Level	Standard (ABEC 1)
Inch/Metric	Metric Bore
Rows of Balls	Single
Width	16 mm
Lubricant	Oil Preservative
Inner Ring Width	16 mm
Enclosure	Open
Snap Ring	No Snap Ring
Cage Type	Metal
Seal Type	Unsealed
Weight	0.439 LB
EAN or UPC	29176014444