6204

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100760948

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

I.D.	20 mm
Static Load Rating [Max]	1,480.00 lbf
Cage Material	Pressed Steel
Inch/Metric	Metric Bore
Limiting Speed - Grease	15000 rpm
Capacity	Standard Capacity
No. in Set	Single Bearing
Dynamic Load Rating	2,878.00 lbf
Seal Type	Unsealed
icNumber	7696766
Inner Ring Width	14 mm
Enclosure	Open
O.D.	47.0000 mm
Outer Ring Width	14 mm
Cage Type	Metal
Material	Steel
Snap Ring	No Snap Ring
Radial Internal Clearance	Normal
Rows of Balls	Single
Precision	Standard
Preload Level	None
Limiting Speed - Oil	18000 rpm
Locking Device	No Locking Device
Seal Material	None
Bearing Type	Radial
Precision Level	Standard (ABEC 1)
O.D. Type	Straight
Width	14 mm
Ball Material	Steel
Corner Radius [Min]	1.00 mm
Radial Internal Clearance Specification	Normal Clearance
Lubricant	Oil Preservative
Contact Angle	0°
Bore Type	Round Bore
Weight	0.231 LB
EAN or UPC	29176014215