6203DDUC3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100760916

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Bore Type	Round Bore
Bearing Type	Radial
Snap Ring	No Snap Ring
Inner Ring Width	12 mm
Rows of Balls	Single
Lubricant	Mul-Temp SRL
Cage Type	Metal
I.D.	17 mm
Precision Level	Standard (ABEC 1)
Precision	Standard
Radial Internal Clearance	C3
O.D. Type	Straight
Inch/Metric	Metric Bore
Seal Material	Buna-N
Locking Device	No Locking Device
Width	12 mm
Capacity	Standard Capacity
Limiting Speed - Grease	12000 rpm
Preload Level	None
O.D.	40.0000 mm
Radial Internal Clearance Specification	Greater Than Normal Clearance
Seal Type	Contact Seals
Cage Material	Pressed Steel
Limiting Speed - Oil	20000 rpm
Outer Ring Width	12 mm
Ball Material	Steel
Dynamic Load Rating	2,147.00 lbf
Static Load Rating [Max]	1,080.00 lbf
Corner Radius [Min]	0.60 mm
Material	Steel
Enclosure	Double Sealed
icNumber	7695847
Contact Angle	0°
No. in Set	Single Bearing
Weight	0.143 LB
EAN or UPC	29176064104