6201DDUC3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100760851

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Radial Internal Clearance	C3
Dynamic Load Rating	1,530.00 lbf
Precision	Standard
Snap Ring	No Snap Ring
Bore Type	Round Bore
Inner Ring Width	10 mm
Limiting Speed - Oil	28000 rpm
Cage Material	Pressed Steel
Seal Type	Contact Seals
Bearing Type	Radial
Inch/Metric	Metric Bore
No. in Set	Single Bearing
Ball Material	Steel
O.D. Type	Straight
Cage Type	Metal
Static Load Rating [Max]	686.00 lbf
Width	10 mm
Corner Radius [Min]	0.60 mm
Limiting Speed - Grease	17000 rpm
Outer Ring Width	10 mm
Seal Material	Buna-N
Radial Internal Clearance Specification	Greater Than Normal Clearance
Contact Angle	0°
icNumber	7695873
O.D.	32.0000 mm
I.D.	12 mm
Capacity	Standard Capacity
Preload Level	None
Locking Device	No Locking Device
Precision Level	Standard (ABEC 1)
Enclosure	Double Sealed
Rows of Balls	Single
Material	Steel
Lubricant	Mul-Temp SRL
Weight	0.082 LB
EAN or UPC	29176063923