Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.
applications
Electric motors and generators
Electrical appliances
Pumps and compressors
Blowers and fans
Speed changers
Gearboxes and drives
Woodworking machinery
Lawn and garden equipment
Transmissions
compliances
Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
caution
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing
O.D. Type
Straight
Preload Level
None
Snap Ring
No Snap Ring
Bore Type
Round Bore
Bearing Type
Radial
Ball Material
Steel
I.D.
1/2 in
Cage Type
Metal
Material
Steel
Inch/Metric
Inch Bore
Enclosure
Double Shielded
Radial Internal Clearance Specification
Normal Clearance
Limiting Speed - Oil
N/A
Static Load Rating [Max]
686 lbf
Cage Material
Pressed Steel
Precision Level
Standard (ABEC 1)
Precision
Standard
O.D.
1.25984 in
Seal Type
Non-Contact Seals
Contact Angle
0°
Dynamic Load Rating
1529 lbf
Seal Material
Metal
Corner Radius [Min]
0.6 mm
Outer Ring Width
10 mm
Locking Device
No Locking Device
Limiting Speed - Grease
22000 rpm
Radial Internal Clearance
Normal
Capacity
Standard Capacity
Rows of Balls
Single
Weight
0.073 LB
EAN or UPC
29176013683
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
