Find a Service Center
- 0.5 in Belt Pitch
- 3 in Belt Width
- 60 Number of Teeth
- 9.495 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Finished Bore | N/A |
| Length Through Bore | 2 in |
| Belt Width | 3 in |
| Material | Steel |
| Bore Range [Max] | 3 in |
| Bore Range [Min] | 0.875 in |
| Outside Dia. | 9.495 in |
| Belt Size | H |
| Type | C-2 |
| Width Across Teeth | 1.3125 in |
| Hub Type | B |
| Hub Dia. | 6 1/4 in |
| Hub Projection | 0.343 in |
| Bushing Type | Taper-Lock |
| No. of Teeth | 60 |
| Bushing Series | 3020 |
| Pitch Diameter | 9.549 in |
| Belt Pitch | 0.5 in |
| Bore Type | Bushed |
| Weight | 21.9 LB |
| EAN or UPC | 697950084022 |
